Small Precison Worm Decrease Gearboxes
There are numerous of specifications you will need to consider when coming up with a worm gearbox selection.
First, what’s the insight and output torque requirements? Next, small worm gearbox verify vendor horsepower/torque charts and select the correct worm equipment reducer.
If the size of the gearbox will probably be an important consideration then check the reducer dimension specifications, not all producers make compact units. Actually, working with the right supplier will help you not merely find the right gear reducer but also avoid some of the most typical errors in reducer selection. We provide a free guide to help you find the appropriate supplier to work with.
For low and fractional horsepower software you can expect two sizes of worm equipment reducer, the SW-1 and the SW-5. Size and torque output will be the major variations between both of these models. Both feature either a hollow or solid result shaft. Both versions are compact and provide users a wide range of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specifications of your unique application or task is essential to selecting the correct worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Small precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped mounting holes at the top and bottom
• Flush fitting bearing caps easy to install
• Input shafts mounted on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capacity of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Right Angle Worm Gear Motors Used
Anywhere a concise dual shaft gear motor or single shaft gear motor is necessary. This right angle gear motor is so versatile it could work just about anywhere.
Features & Options
Double Shaft or Solitary Shaft
Hollow Shaft
Maximize Torque in a little Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifications
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power offers designed and built unique, high precision mini gearboxes that cannot be found anywhere else. Our miniature gearboxes are available in many configurations, which includes worm and wheel, cross axis helical, bevel, inline spur, and more. We can also provide customized micro gearboxes that were created and created to meet your unique specifications.
Contact us for the mini gearbox your application requires, or request a quote upon a customized micro gearbox.
Micro Gearbox Options
Gearboxes are also called reducers, gear reducers, rate reducers, gear drives, and gearmotors. All terms can be used pretty much interchangeably. Please note that the links for our small gear drives include info on the full range of frame sizes for that series or style.
Bevel Box Micro Equipment Drive
Our bevel container miniature gear drives are software rated for the the best possible balance of performance and cost. Torque could be balanced to meet your RPM and working life requirements. Lightweight with low backlash efficiency (as little as 1°, with option of 1/2”).
Output torque: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input speeds up to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high amounts of thrust in a concise package. They provide an output shaft at 90° from the input, and so are obtainable in gear ratios from 1:1 to 40:1. Lightweight but long lasting, with machined aluminum housings and hardened alloy steel gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: only ≤30 arc minutes
Rated for input boosts to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc mins of backlash or better. Also called “shaft to bore gearboxes,” these devices provide a single insight shaft that protrudes from opposing sides of the housing; output is definitely a keyed bore. Standard one- and double-end shafts can be found and given keys and retainer rings. An array of gear ratios and input sizes are available to meet your needs.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Available in ratios from 5:1 to 120:1
Rated for input speeds up to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened steel gears, solid aluminium housings, and long term lubrication. They provide two input shafts on reverse sides of the frame, with two output shafts perpendicular to the input shafts. Our mini 4 shaft worm equipment drives deliver high efficiency functionality with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: less than ≈2°
Available with gear ratios from 1:1 to 32:1
Rated for input speeds up to 4,000 RPM
Miniature Flange Worm Equipment Drive
These micro flange worm gearboxes create an output at 90° from the input. They deliver superior overall performance in an amazing array applications and are built with small footprints, making them ideal for operations where space is bound. They offer high performance with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: as low as ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specifically engineered for encoder applications, Ever-Power’ micro inline spur gear drives can be found in two frame sizes, and so are rated for speeds up to 3,000 RPM. Aluminium housings and stainless gears and shafts make these inline spur gearboxes difficult and corrosion resistant, for your most demanding applications.
Output torque: up to 125 oz.-inches
Low backlash: less than 15 arc minutes
Available with gear ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature correct angle worm equipment reducers deliver excellent performance with high efficiency, and show rugged structure for challenging power transfer operations. Available in three gear ratios (5:1, 10:1, 20:1), our compact worm gearboxes are designed in extremely small footprints for applications where space is limited.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Compact footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power can engineer and produce a custom miniature gearbox to meet up your unique specs. We can produce custom micro gearboxes in any configuration your application requires, with result torque amounts as high as 900Nm. We are able to work from your own gearbox styles, reverse engineer an existing unit, or help you develop an all-new design that provides the performance you need. Request a quote on a customized miniature gearbox or e mail us to discuss your specific requirements.
The Ever-Power Advantage: Small is No Big Problem
Broadest collection of small gear reducers
Greased for life
Ruggedly built
Modifications and unique ratios available
Custom small gearboxes made to suit
Input & Output Shafts
Input and result shafts with drive crucial and retainer rings can be supplied to your specs for just about any of our hollow bore miniature gearboxes. We provide a basic selection of one ended or dual ended shafts to put together in these gearboxes. All gearbox shafts are given keys and retainer rings.
For P and PF series worm and wheel gearboxes use our P/PF gearbox shafts.
For Electronic series crossed axis helical gearboxes use our E gearbox shafts.
For F series spur gearboxes, contact our software engineers to go over your particular needs.
We offer a broad collection of misalignment shaft couplings in inch and metric bore sizes. In . and metric precision surface shafts can be found from stock.
Contact Us for POWERFUL Miniature Gearboxes
We will be the miniature gearbox professionals. Our micro gear drive models deliver superior efficiency in a small footprint, and are rugged enough for challenging work environments. Contact us to learn more about our mini gearboxes, or demand a quote on a custom model that is tailored to your needs.
Additional advantages of worm drive gearboxes include: