Shandong planetary reducer

  • product category: DC geared motor
  • Manufacturer: Zibo XINLAN Zeyu Motor Factory
  • price: Call for consultation
  • add time: 20/06/22
  • The number of clicks:  
Product Details

The conditions that the planetary reducer needs to meet for oil change:
1. When the oil temperature exceeds 80°C during work, and the oil pool exceeds 100°C, the machine needs to be shut down for inspection. If noise is found, the cause of the fault must be eliminated.
2. Before changing the oil, it is necessary to make sure that the equipment is cooled for a period of time, and there is still a certain amount of warmth in it. If the viscosity of the oil is completely cooled, the viscosity of the oil will increase, and it should be noted that the power supply needs to be cut off when refueling.
3. The oil needs to be changed when the jingmi planetary reducer is running for 200-300 hours. This is the time for the first oil change; after 5000 hours or one year, it needs to be replaced with new oil. If the equipment is out of service for a period of time, the oil needs to be changed regardless of whether it has been used or not. The time required to change the oil.
4. The oil leakage is mainly caused by the increase in pressure. The shaft head of the reducer is designed with an oil seal ring, or the upper cover of the reducer is located at the shaft head and a semi-circular groove is glued to make the oil splashed on the upper cover flow to the lower box along the two ends of the semi-circular groove. .

Planetary reducer


Planetary reducer


Planetary reducer


tags: Shandong planetary reducer manufacturer, Shandong planetary reducer price
The number of clicks:   Updated: 20/06/22 14:48:06 [print this page】 【关闭【go back to the last page】
contactwe If you have any questions, you are welcome to inquire at any time