Precautions for installing DC geared motor

The number of clicks:   Update time: 20/08/07 14:55:08 Source:www.worm-drive-motor.xyz关闭share it:

  With the development of DC geared motors, they have played an ideal role in industrial production. The products have improved production efficiency and have a high degree of mechanization and automation.So when there is a small failure in use, in order to avoid the occurrence of the failure, what should we pay attention to when installing?Next, the editor will give a brief introduction.

DC geared motor

  1. The DC geared motor should be firmly installed on a stable foundation or base, the oil in the drain tank should be emptied, and the cooling air should be able to circulate smoothly.
  2. Before installation, clean the installation shaft and check whether there are protrusions and dirt on the installation shaft.If there are any, clean them all.
  3. When there are protrusions in the transmission coupling or gear, and the sprocket is used in the transmission, a protective device should be considered.When the output bearing is subjected to a large radial load, a reinforced motor should be selected.
  4. The transmission center axis should be aligned during installation, and the error should not be greater than the compensation of the coupling used, so as to extend the service life of the motor and obtain the ideal transmission efficiency.
  5. Do not use rigid fixed couplings as much as possible.Improper installation of this type of coupling will cause unnecessary external loads, which will cause early damage to the bearing, and even cause the output shaft to break in severe cases.
  6. When installing the transmission parts on the output shaft, bolts should be used to press the transmission parts in, without hammering, so as not to damage the internal parts of the DC geared motor.The installation and operation of the DC geared motor is very important, and it is directly related to the state of use of the motor.Therefore, the user should carefully understand the installation and operation of the motor to ensure its normal operation and create greater benefits for the enterprise.
  The above is a brief introduction to the precautions for installing a DC geared motor.Therefore, in normal use, we should develop good usage habits, carefully inspect and maintain, to prevent accidents and unnecessary losses.If you have any other questions, please leave us a message on the website.
contactwe If you have any questions, you are welcome to inquire at any time