Ever-Power Corporation , announces its right position NEMA gearbox designed to IP65 specs for use in clean straight down applications in packaging gear and comparable machinery. Rated backlash is definitely 30 arc-minutes with options for 4 or 8 arc-minutes. The NEMA 34 flanged gearbox has 440C Stainless bearings with seals and Nitrile o-bands shaft seals on both input and output. All fasteners are stainless steel. Hard anodized aluminum or 316 Stainless housings can be found. Customizing for apart from NEMA motors or your specific application is quickly done.
This Nema 17 stepper motor with 39mm body and 1.68A rated current, integrated with a 41mm Planetary gearbox of 5:1 gear ratio. It’s a great choice to applications that with special space but need low swiftness and/or high torque.
Manufacturer Part Quantity: 17HS15-1684S-HG5
Motor Type: Bipolar Stepper
Step Angle: 0.36 deg
Holding Torque without Gearbox: 39Ncm(55oz.in)
Rated Current/phase: 1.68A
Phase Resistance: 1.6ohms
Inductance: 3.2mH ± 20%(1KHz)
Gearbox Type: Planetary
Gear Ratio: 5 : 1
Backlash at No-load: <=15 arcmin
Max. Permissible Torque: 3.5Nm(495.6oz.in)
Moment Permissible Torque: 6Nm(849.7oz.in)
Max. Radial Load: 150N
Ambient Temperature: -10 – 90℃
Insulation Class: B
Noise: <=50 dB
Life: 20000 h
Frame Size: 42 x 42mm
Motor Length: 39mm
Gearbox Length: 41mm
Shaft Diameter: Φ8mm
Shaft Length: 23.5mm
Key-way Length: 14mm
Number of Leads: 4
Lead Length: 320mm
Replaced by the 3325_0, a engine with the same NEMA size and same torque.
This NEMA-17 motor comes with an integrated Planetary gearbox with a 52/11 :1 ratio. It generates 16.2 Kg-cm of torque at 1.68 Amps.
When linked to a 1067 – EP, the 3317 includes a maximum speed of just a little over 900 RPM. At the output of the gearbox, the stage angle is just a little under 0.35°. With all the step position in calculations, you should derive the exact step position by dividing 1.8° by the gearbox reduction ratio.
This specific revision of the 3317 is made by a different producer, but should behave very much like the revision 0 version.
Brother Gearmotors NEMA C-Face Speed Reducers
The gears in these NEMA C-Face speed reducers are high strength, maintenance free and may be mounted in any path with their slip fit “O” ring style. Low to high decrease ratios, flange install or foot install types, right angle or hollow shaft right angle types available. Match NEMA C-Face AC motors, brushless DC motors and brushed DC motors.
For 1/2 HP up to 3 HP Motors
NEMA C-Encounter, 140TC and 180TC input flanges
Inline Helical Gear Velocity Reducers
Right-Angle Hypoid Gear Speed Reducers
Downloads & Reference
NEMA C-Face Acceleration Reducers Lineup
Maximum Input Speed
NEMA 56C Speed Reducers
NEMA C-Face Speed Reducers
Parallel Shaft (Foot Install)
5:1 ~ 200:1 3600 r/min
Parallel Shaft (Flange Install)
Right-Angle Hollow Shaft
5:1 ~ 240:1
Right-Angle Solid Shaft
5:1 ~ 240:1
*Torque and Acceleration vary based on input voltage and frequency, please review item specifications for details.
Compared to a spur equipment of around the same pitch size, Helical gears can transfer high loads in greater speeds. That is because of the gradual engagement of the teeth and simple transfer of the strain.
Lightweight and Compact
Die cast aluminum equipment housings make these velocity reducers light in weight, allowing engineers to create more economical mounting provisions
High-quality synthetic grease is utilized in every gearboxes. They are packed at the factory , nor require maintenance filling or level checks. This saves precious time at set up and eliminates concern for pricey oil disposal necessary by the EPA.
Mount in virtually any Direction
These gearboxes are sealed with machine “slip” suit “O” rings and dual lip spring shaft seals upon both the motor and input shaft and output shaft driver. Therefore, the gear motors could be mounted in virtually any conceivable direction without concern for the position of a breather plug.
NEMA Result Flange Planetary Gearboxes, Max. Ratio 1000:1
Frame Size:42.6/60/90/115/145 mm
Nominal Output Torque:8~215 N.m
Nominal Input Speed:2500~4000 rpm
Max. Input Speed:5000~6000 rpm
Backlash:12~15 arcmin, three stages, 6~9 arcmin, single stage, 8~12 arcmin, two stages
Noise Level:60~67 dBA/1m
The Ever-Power EP Series gearboxes are equipped with a NEMA output flange with metric shaft, to provide exceptional torque ratings and convenience of many of present servo and stepper movement control applications. The gearboxes are drop-ins for some industry standards and available from solitary to three levels with ratios 3:1 up to 1000:1, the best backlash of < 6 arc-a few minutes. Adapters for all servo and stepper motors.
5 frame sizes with NEMA 17, 23, 34, 42, 56 flange and metric shaft
Backlash only 6 arc-minutes
Ratios up to 1000:1
High radial and axial loading capacity
20,000 hours service life
Synthetic grease, free of maintenance
Reliable operating performance, cost effective integration