Maintenance of DC geared motor:
1. The bearing cover is used to fix the axial position of the shaft system components and bear the axial load. Both ends of the bearing seat hole are closed with bearing covers.
2. Oil level indicator Check the oil level of the oil sump in the reducer, and always keep a proper amount of oil in the oil sump.
3. When changing the oil of the oil drain plug, drain the dirty oil and cleaning agent. An oil drain hole should be opened at the bottom of the tank seat and at the low position of the oil sump. Leak-proof gaskets should be added between the joint surfaces of the body. Frequent start-up inspections are still very helpful.
4. Ensure that each time the box cover is disassembled and assembled, the accuracy of the bearing seat hole manufacturing and processing should be maintained. Before finishing the bearing hole, a positioning pin should be fitted on the connecting flange of the box cover and the box seat.
XINLAN motorLook for it: Zibo XINLAN Zeyu Motor Factory provides selection guidance, principle and parameter introduction, complete models and reasonable prices for DC speed motors and planetary gear motors.