Agricultural Gearbox
The agricultural gearbox is the main mechanical element of the kinematic chain of agricultural machines. It is normally powered by the tractor power take-off via the PTO shaft and the gearbox drives. The working torque can also be transmitted to the gearbox by hydraulic motors or belt pulleys, in addition to chain gears.
Agricultural gearboxes will have one input shaft and at least 1 output shaft. If these shafts sit at 90° to one another, the gearbox is an ORTHOGONAL ANGLE gearbox or more commonly called a right-position gearbox.

rotary tiller gearbox is certainly adopted middle equipment transmission program, mounted with the tractor of 12-80HP. Tractor wheel tracks are completely covered after tillage as the operating width is much wider. The quality is reliable and the performance is well. So it can be utilized on dry and paddy field. It can reduce the time, laboring, and cost, etc. during operation

Increasers and Reducers
When the gearboxes have both gears with different numbers of teeth.
The gearbox is a reducer when the driving gear, i.electronic. the main one with the insight shaft, gets the fewer amount of teeth (pinion), thus the result shaft rotates slower compared to the input shaft.
It is named an increaser when the input shaft is mounted on the apparatus with the larger quantity of teeth (crown), hence the output shaft rotates faster compared to the input shaft.
Right-angle gearboxes, distributors or rotational invert gearboxes
When the gearboxes have gears with the same number of the teeth.
The gearbox is called right-angle when it only has two shafts (input and output),
whereas it is called a distributor when there are at least two output shafts.
It is called a rotational reverse gearbox and parallel offset in the versions with parallel shafts with two gearboxes.

Speed change
in addition to the primary couple of gears and relevant shafts, the gearboxes may also have other gears with a different number of teeth. The gear shift of the main pair of gears with the secondary types allows different speeds. The manual change of the secondary equipment set with gears with different amount of teeth allows adjustments to the output rotation speed.
CMR GROUP can design and produce also agricultural machinery applications.

Did you appreciate this write-up regarding gearbox for agricultural machinery?