Select Page

Design “MD” ELEVATOR BUCKETS for general objective elevators

Rugged building Type “MD” Buckets are most common for general objective elevators. Covering a wide selection of sizes from 4 to twenty inches long, they are applied for ?ne and medium dimension products such as coal, cement, pulp, grain, ear corn, and so on. They may be widely applied for heavy abrasive products this kind of as sand, gravel, and stone. Reinforced front lips give Style “MD” Buckets a long sporting digging edge. Uniform wall thickness and strong corner reinforcement make them stronger than steel buckets on the identical gauge.They are smoothly surfaced and have ends sloped inward at six degree angles to insure good ?lling and clean discharge. Obtainable in Malleable and Al-lied-Locke Promal.
Chain for which buckets can be found in-clude: Steel Bushed Roller, Steel Bushed, Blend, “H” Class Mill, 400 Class Pin-tle, and 700 Class Pintle. “MD” Buckets are employed with G1, G6, K1, or K2 type attach-ments once they can be found in the chain variety.
Capacities are for buckets ?lled to the line XX (see diagram). The sensible operating capability will vary with all the loading situations, angle of re-pose on the materials currently being dealt with, and also the incli-nation in the elevator.
Design “AC” ELEVATOR BUCKETS for managing cement, lime, and ?uffy products
Fashion “AC” Buckets offer rapid, thorough discharge of cement, lime, together with other dry, ?uffy components. Vent holes while in the bottom of every bucket release trapped air in ?lling and allow materials to empty from bucket swiftly and entirely on discharge. Furthermore to reinforcing lips, hooded backs reinforce “AC” Fashion Buckets. This function permits closer bucket spacing and offers 30% greater carrying capacity than other bucket variations from the exact same length. These sturdy buckets have an additional thickness of metal at put on points for longer service. Readily available in Al-lied-Locke Malleable and Promal.
Fashion “AC” Buckets tend to be made use of with hefty duty engineering chain such as Bushed Steel Chain with K2 and K3 design attachments.
Capacities are for buckets ?lled to both line XX or YY (see diagram). The sensible operat-ing capability will fluctuate with loading situations, angle of repose in the material becoming dealt with, as well as inclination of the elevator.

Recent Posts

worm drive motor

As one of leading worm drive motor manufacturers, suppliers and exporters of mechanical products, We offer worm drive motor and many other products.

Please contact us for details.


Manufacturer supplier exporter of worm reducer